The ball bale packaging system is composed of silo, silo discharge conveyor and ball baling equipment, which is used to pack all compressible wastes or recyclables, especially suitable for domestic garbage, residual garbage, recyclable garbage, sawdust, materials that can be used as substitute fuel and other kinds of waste compression and packaging, which can reduce the volume of waste by 40-70%, greatly reducing transportation and storage costs. The entire process runs automatically, requiring only one operator in the monitoring room to monitor the equipment and change the packaging film.
Specification:
| Input materials | The maximum size is 400mm, but a small amount of compressible material is allowed not to exceed 800mm (e.g. sea surface, plastic) |
| stuffing | Material flow through continuous, controlled flow |
| The ball bundle is unloaded | The ball bundle is unloaded |
| Connect the load | 100kW |
| Average energy consumption | 60kW/h |
| Number of bales/hour | About 20 |
| Energy consumption of a single ball bundle | 3kW |
| Energy consumption per ton of garbage | 1.97kW |
| Ball bundle diameter | 1.5m |
| Ball bundle height | 1.2— 1.6m |
| Ball bundle volume | 2.83m³ (height：1.6m) |
| Ball bundle weight | Alternative fuels: about 800-1200kg; Crushed bulky garbage: up to about 1400kg; Crushed domestic waste containing organic matter: up to approx. 2300kg (depending on the composition and unit density of the waste or recyclable) |
| RBS size | 40ft container container, approx. 12.2m (length) × 2.5m (width) ×2.9m (height) with container lock |
| Packing film | Material: LLDPE, width: 500mm, thickness: 0.025mm |
Device features
- The equipment is fixed, but you can choose to install 4 hydraulic support columns, which can be easily loaded and unloaded without crane;
- Low energy consumption and low enterprise operating costs, less mechanical loss;
- No need to use mesh, steel wire or metal strip for binding;
- Due to high-density compaction and large volume ball bales, the average film consumption is very low (each ball bundle is 6m high, the volume is 2.83m3);
- At the beginning stage of the filler, the garbage in the extrusion bucket is highly compressed through two hydraulically driven drums;
- High-quality ball bales reduce transportation frequency, reduce transportation costs and labor costs;
- According to different packaging films, garbage and recyclables can be stacked in the middle or long term of the open field;
- Thoroughly isolate the odor and sewage generated by waste;
- Maintain the physical properties of the waste and facilitate its future use;
- Prevent spontaneous combustion of waste ball bundles.
An efficient, fully automatic ball baling system for alternative fuels.
