Belt Conveyor Roller Belt Turns the Drum
The parts of the belt conveyor that transmit power. The surface of the drive roller is bare steel, cast rubber smooth, herringbone and argyle rubber covered surface. Text instructions are generally used when ordering
Belt Conveyor Roller Belt Turns the Drum DTII type drive drum:
Belt Conveyor Roller Belt Turns the Drum DT75 type drive drum:
The cylinder steel joint produced by our company is welded with V-shaped groove. The cylinder’s joint is made of high-strength ductile cast steel, and the welding groove of the joint shaft sleeve and other welding grooves are machined. After welding, stress relief treatment is done and weld is carried out, 100% non-damage and 25% X-ray film inspection is carried out, static balance test is carried out after assembly. Jingda B/T9239.1-2006 G40 standard
| 带宽(mm) Belt width |
滚筒直径范围(mm) Pulley diameter | 所能传递扭矩(KN.M) Transfer torque | 所能承受合力(KN) Strength |
| 400 | 400 | 2.0 | 40 |
| 500 | 500 | 2.7 | 49 |
| 650 | 500-630 | 3.5-7.3 | 40-80 |
| 800 | 500-800 | 4.1-32(2X23) | 40-160 |
| 1000 | 630-1000 | 4.6-52(2X42) | 40-330 |
| 1200 | 630-1250 | 12-120(2X60) | 52-540 |
| 1400 | 800-1400 | 20-140(2X110) | 100-880 |
| 1600 | 800-1600 | 50-180(2X160) | 260-1140 |
| 1800 | 800-1800 | 60-180(2X180) | 400-1280 |
| 2000 | 1000-1800 | 65-220(2X200) | 600-1420 |
| 2200 | 1000-1800 | 65-220(2X200) | 620-1500 |
| 2400 | 1000-1800 | 65-220(2X200) | 620-1500 |
Rollers can be produced according to buyer’s requirements.
