Round Pipe Belt Conveyor Overview
Tubular belt conveyor “hereinafter referred to as pipe belt machine” is a new type of bulk material conveying equipment developed by our company by absorbing foreign advanced technology. The product is suitable for conveying various bulk materials with a density of 0-25t/m under various complex terrain conditions, and the working environment temperature of ordinary tubular tape is used in the range of -25C to +40C; If special requirements are required, special specifications are used to allow the working environment temperature to reach +160C. The maximum material conveying particle size of the pipe belt machine is 400mm. Typical materials conveyed are: ore, coal coke, limestone, crushed stone, oil shale and sintered mixture. Some very difficult materials such as clay, waste residue, concrete, metal waste residue, fly ash, tailing, bauxite and dust filter can also be conveyed by pipe belt machine. The product can be widely used in electric power, building materials, chemical industry, mining, metallurgy, wharf, port, coal, grain and other industries.
Round Pipe Belt Conveyor BASICSTRUCTURE
The machine usually uses a hexagonal arrangement of idler groups to force the conveyor belt to roll into a round tube to transport materials. The head, tail, receiving section, discharge section, tensioning device, etc. of the pipe belt machine are basically the same as ordinary belt conveyors in structure. After receiving the material in the excessive section of the tail, the conveyor belt is gradually rolled into a round tube for closed conveying of materials, and then gradually unfolds to the head transition section until the material is discharged. The specific structure of the pipe belt machine is shown in Figure 1, and the cross-sectional view of the pipe belt machine is shown in Figure 2.
Round Pipe Belt Conveyor TUBEWITHAMACHINESTRUCTURE
| PRODUCT SPECIFICATIONS AND PARAMETERS Table 1, pipe diameter (bandwidth, breaking area and allowable blockiness corresponding to different pipe diameters) |
|||||||||||
| Pipe diameter(mm) | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 500 | 600 | 700 | 850 |
| bandwidth(mm) | 400 | 600 | 780 | 1000 | 1150 | 1300 | 1530 | 1900 | 2250 | 2650 | 3150 |
| Broken area100%(m) | 0.0079 | 0.018 | 0.031 | 0.053 | 0.064 | 0.09 | 0.147 | 0.21 | 0.291 | 0.2789 | 0.5442 |
| Broken area75%(m³) | 0.0059 | 0.013 | 0.023 | 0.04 | 0.048 | 0.068 | 0.11 | 0.157 | 0.218 | 0.2842 | 0.4081 |
| Maximum blockiness(mm) | 30 | 30-50 | 50-70 | 70-90 | 90 -100 |
100 -120 |
120 -150 |
150 -200 |
200 -250 |
250 -300 |
300 -400 |
| Ordinary belt conveying Machine corresponding width(mm) |
300 -400 |
500 -600 |
600 -750 |
750 -900 |
900 -1050 |
1050 -1200 |
1200 -1500 |
1500 -1800 |
1800 -2000 |
2000 -2400 |
|
| 表2,输送能力 | |||||||||||
| 管程tmm)需通 评m | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 500 | 600 | 700 | 850 |
| 0.8 | 17 | 37 | 66 | 118 | 138 | ||||||
| 1.0 | 21 | 47 | 83 | 148 | 173 | 238 | |||||
| 1.25 | 26 | 59 | 104 | 185 | 216 | 297 | 482 | 688 | |||
| 1.6 | 33 | 75 | 132 | 232 | 276 | 380 | 616 | 881 | 1238 | 1616 | 2327 |
| 2.0 | 42 | 94 | 166 | 296 | 346 | 472 | 770 | 1100 | 1548 | 2022 | 2909 |
| 2.5 | 208 | 370 | 432 | 594 | 964 | 1376 | 1935 | 2528 | 3636 | ||
| 3.15 | 460 | 543 | 748 | 1213 | 1734 | 2438 | 3185 | 4581 | |||
| 4.0 | 950 | 1540 | 2200 | 3096 | 4044 | 5818 | |||||
| 5.0 | 1928 | 2750 | 3870 | 5056 | 7272 | ||||||
Round Pipe Belt Conveyor Description
Tubular belt conveyor is a special continuous conveying equipment developed on the basis of ordinary trough belt conveyor. Its conveying path can be arranged with a spatial curve, the conveying inclination angle is large, and the single conveying distance is long under complex terrain conditions, which can overcome the defects of ordinary trough belt conveyor and the limitations of the scope of use, and its own closed structure can also reduce the loss of materials during transportation and environmental pollution.
