Nylon Conveyor Belt FEATURE:
- The belt body has good elasticity and impact resistance
- The belt body has high adhesion strength and flex resistance
- Good groove
- Compared with polyester cotton canvas, it has high strength, thin belt body and light weight
- Resistant to humidity, heat and corrosion
- Resistant to wear and tear, long service life
Nylon Conveyor Belt USES:
It is suitable for conveying materials under medium and long distances and high load, high speed, large impact and heavy wear, such as coal, ore stones or finished items
Nylon Conveyor Belt Specification
| Width of belt(mm) | Number of layers of cloth | 覆盖胶厚度(mm) | |
| Face side | Non-face side | ||
| 400 | 3~4 | 4.5 3.0 | 3.0 1.5 |
| 500 | 3~5 | 4.5 3.0 | 3.0 1.5 |
| 600 | 3~5 | 6.0 4.5 | 3.0 1.5 |
| 650 | 3~5 | 6.0 4.5 3.0 | 3.0 1.5 |
| 800 | 3~6 | 6.0 4.5 3.0 | 4.0 3.0 1.5 |
| 1000 | 3~7 | 6.0 4.5 3.0 | 4.0 3.0 1.5 |
| 1200 | 4~7 | 6.0 4.5 | 4.0 3.0 1.5 |
| 1400 | 4~7 | 6.0 4.5 | 4.5 3.0 |
| 1600 | 4~7 | 6.0 4.5 | 4.5 3.0 |
| 1800 | 4~7 | 6.0 4.5 | 4.5 3.0 |
| 2000 | 5~10 | 6.0 4.5 | 4.5 3.0 |
| 2200 | 5~10 | 6.0 4.5 | 4.5 3.0 |
Nylon Conveyor Belt Physical properties of the overlay
| General purpose overlay performance level | Symbo | Tensile strength shall be no less than | Rate of elongation at break shall be no less than | Abrasion wear mm² shall be no less than | After aging at 70°C ×186h, the rate of change of tensile strength |
| Strong scratch type | H | 24.0 | 450 | 120 | -20~+25 |
| Strong abrasion type | L | 18.0 | 400 | 100 | -20~+25 |
| General type | D | 15.0 | 350 | 200 | -20~+25 |
The tensile strength shall be no less than ≥ 14
Rate of elongation at break shall be no less than≥ 480
| Project | Among the cloth layar | Inter layar between Cover and belt carcass | |
| The thickness of overburden | The thickness of overburden | ||
| Longitudinal specimen average | 4.5 | 3.2 | 3.5 |
| Lowest peak of all specimens | 3.9 | 2.4 | 2.9 |
| Project | Among the cloth layar | Inter layar between Cover and belt carcass | |
| The thickness of overburden | The thickness of overburden | ||
| Longitudinal specimen average | 4.5 | 3.2 | 3.5 |
| Lowest peak of all specimens | 3.9 | 2.4 | 2.9 |
| K3级 | K2级 |
| The average flame duration of the three longitudinal full-thickness specimens was not greater than 60S, and there was no re-ignition in any single result, and the static conduction was not more than 3×10²Ω | The total flame duration of the six full-thickness samples is not more than 45S, the single value is not more than 15S, there is no re-ignition phenomenon in any of them, and the electrostatic conduction is not more than 3×10²Ω |
Nylon Conveyor Belt ORDER INSTRUCTIONS
- The conveyor belt is ordered to indicate the width (mm), the number of cloth layers, the thickness of the covering glue (mm) + the thickness of the lower cover (mm), and the length
- Strong conveyor belt indicates the canvas model: heat-resistant, cold-resistant, oil-resistant and acid-alkali conveyor belt should be indicated in text.
- Annular conveyor belts and patterned conveyor belts should be described in detail.
- Such as CC56 conveyor belt, width 800, 6 layers of canvas, glue thickness 4.5mm, glue thickness 1.5mm, 100 meters
Expressed as follows:
CC56-B800X6 4.5+1.5 100m
Nylon Conveyor Belt Description
Nylon conveyor belt, in which the intermediate sandwich canvas is nylon canvas. Nylon (NN) conveyor belt has the characteristics of thin belt body, high strength, impact resistance, good groove, large adhesion between layers, excellent flexibility and long service life, suitable for medium and long distance, high load, high-speed conditions to transport materials, widely used in mines, coal yards, chemical industry, metallurgy, construction, ports and other departments.
